Skip to main content

System

On this screen you will find an overview of system settings that you can adjust according to your preferences. Move between individual items using arrows 2 / 2.

Backlight Intensity​

  • Sets display brightness from 0% to 100%.
  • Can be adjusted in 5% steps.

Higher brightness is suitable for bright ambient light, lower brightness saves battery.

Display Backlight​

Display backlight behavior settings. Three modes are available:

  • Automatic – backlight turns off automatically after a certain period of inactivity.
  • Manual – user controls backlight manually:
    • On/off is done by simultaneously pressing OK + arrow up buttons
  • On – backlight remains permanently on.
tip

If you want to save battery, don't set On mode.

Display Mode​

Here you choose which mode the display should operate in. There are 3 options:

  • Day – light background with dark text, suitable for use in daylight.
  • Night – dark background with light text, less glaring in the dark.

Language​

Here you can choose the language of the entire device interface. Link to guide.

Units​

Switch between two unit systems:

  • Metric – meters
  • Imperial – miles

Time Zone​

Allows you to set the time zone according to your geographical location.

  • Range: –12 to +12 hours
  • Time zone affects time display throughout the system

Bluetooth​

Used to connect the controller with the mobile application.

  • Bluetooth must be enabled if you want to use phone connection.

Format SD Card​

This option is displayed only if an SD card is inserted in the device.

  • "Format SD Card" button – used to completely erase data on the card
  • Use only if you really want to remove all content.
WARNING

Formatting is irreversible – all data on the SD card will be permanently deleted.

Factory Settings​

Restore device to default (factory) state.

  • Erases all data and user settings
  • Device will be in the state as when purchased
Warning

The action cannot be undone! Use only when necessary.